HKS OIL COOLER,

single setup replacement shown.


Complete with Heat shield and air guides this is a full kit using braided lines and is basically double the size of a Evo 8 factory oil cooler.
This also runs in conjunction with your waterspray setup and a direct feed is flush onto the core for extra cooling and in the kit is a cooling vent that goes on the side of the bar to cause a negative PSI drop which causes a vacuum to exit any unwanted hot air.


So why change it?

ok..

Hot oil means a hot car.....when oil runs hot so too does your water the oil is the blood of the car if it runs cool so does your car.


why not buy a universal core.

Sure a universal core will work... however.
you need to
mount it
shield it
locate it
braided lines
oil line fittings

and oh.. also make sure it does the job.
and = a big headache and a shitload of time.

So stick with what you know....
HKS OIL COOLER KITS

Everything comes in the kit to make it a easy install and does the job first time everytime.




Guys i have both .


DUAL
and SINGLE
Setups instock.


HKS OIL COOLER RRP $1695


JUSTJDM PRICE
$1175 DEL


ENDS SUNDAY

Wow thats a beautiful kit!!!

Do many of you with oil temp gauges get to stupid levels when tracking in summer?

They do get quite high, weird thing is I run around tunning the boost controller with the new oil cooler I had it at 40deg basicly it got to a max op temp of around 55
went for a blat tried to get it to rise best i got was 91

considering the 7 got 140-150 at the track

yep.

takes a good 5 minutes of cool down driving to bring it to a fit state to park the car.

I am guessing these kits would fit the 9 aswell?

HI, Yes these will fit the 9 as well there are 2 types of kits 1 with a remote filter and 1 to std area fitment.
ALL i can say is it looks dam fine

ok so how did the HKS cooler rate on the track?

in the 7 oil hung around 140-150

using the HKS oil cooler it peeked at 122 deg now thats pretty reasonable drop in my book,
So yes they do work
are they worth the money

100% no questions asked,

How important is your motor?

BACK IN STOCK!!!!!!!!!!!!!



EVO 7,8 and 8 MR series Oil cooler kits instock!!!!!!!!!!!!!!!!!!!

Do you have something like this for a EVO 6 ??

Cheers.

hi yes instock ready to go

pm sent

guys 2 more landed today and are instock.

remember these come complete with hard core fittings, lines , heat shield and trays and negative psi vent for added cooling

Hi Ryan,

Do theses units include a thermostat in the remote filter kit for the EVO IX?

Cheers,
Chris

hey,
where abouts is the remote filter located?

ok there is no remote oil location in these kits,
these all locate back where your current junction is.
and no the thermosat is seperate

These are an excellent piece of gear, I have been running one of these for a year in addition to the standard cooler. Thoroughly recommended

to answer a pm,

Does everything come in the kit to fit my Evo 8 do i need to cut into my bar?


Yes everything comes in the kit to fit your Evo 7,8,9

The only time you need to cut into the bar is if you choose to run the HKS low psi outlet vent.

anything that would fit a oz tme 6.5?

always

OK GUYS.....


got instock for the long hot summer we have comming.

Check the first post for kick ass pricing.

guys another oil cooler sold to WA.

Evo 9 looking good to go.