The M7960...

sounds like a new and improved weapon for Unreal tournament

well it is a weapon...

a weapon for your EVO






Japan has put the cards on the table ......


the world of full turbine kits is dying.....

Tomei has got a new weapon...

This bad boy is ready to take on some serious compeditors....

So lets get to it...






DEVELOPMENT THEME
･ Easy Bolt on Upgrade and designed for the stock 4G63 setup.
･ Exceeds all EVO 4-9 turbines
･ Improved response throughout the entire area
･ Amazing performance without sacrificing daily drivability
･ With an Power Output potential of over 400 HP----GIDDY UP
･ Tested for long term durability
･ Circuit Performance design (for long straights & acceleration)


SMOOTH FLAT PRIMARY EXHAUST PRESSURE OVER THE ENTIRE POWER RANGE.
With a smooth power delivery from low in the power band all the way up. Smooth drivability can be maintained without compromising performance.


STOCK LIKE RESPONSE
Larger turbos usually loose out on response, but our M7960 design was designed for all round performance gain aspects. More Power & Best all round response. With extensive R&D with various turbine wheel designs and sizes after many months this is the results of our extensive research.


IMPROVEMENT GAINS WITH THE STOCK DISPLACEMENT
With various restriction possibilities we found that this turbine size is an overall best improvement from the other stock turbines that Mitsubishi had designed. We also tried to keep the same stock like characteristics that the general end users enjoyed when they 1st got their EVO.


MAINTAINS BOOST EVEN AT HIGH ENGINE SPEEDS
The research results shows the stock setup looses boost pressure from 6000RPM and not suitable for high end RPM. Our design maintains boost levels way beyond that and leaves more room for extra improvements for more options for the end user.


COMPLETE BOLT ON APPLICATION
This turbine kit is supplied as a complete upgrade kit from the stock turbine. All the required gaskets, piping and nuts and bolts for fitting are included to save your time from sourcing the little parts to complete the installation.












PRICE
$2490

$2790
with fitting kit


HOW DO YOU LIKE THOSE APPLES.......

Wait for it .....


just to add salt to the wound I will
have these before anyone else in AUSTRALIA...

Get ready to rumble people.....

You know JUSTJDM has got your back.

Congrats on learning how to post Pic's Ryan!

Jason,


just so you know I used all my space up that i was allowed for photos.

I had to request for more space hence why i could not post pic's before.

Way to step up Ryan!

And you can externally host the images. www.photobucket.com

ok people that is total of 6 units sold...


lets go people



you wanted results well i got em

Ryan - Isn't this just a 20G?

Couldn't I get a better car with a GT40 when a 8.5 hotside?

:D

yeah...something like that

so bloody tempting!
if u could make the invoice out to something more like replacement parts for an Isuzu truck.........

LOL!!!

seems like a good price Ryan- any extra for a fitting kit to suit a 6?

fitting kit $350
bu hey
it's xmas...sorta

$299

Any delivery date updates for the excited punters...?

just out of curiousity how many have ordered the tomei turbo

says above 6 units sold..but that was dated on the 15th, he could have sold a couple more.

currently up to 8 units



in transport now to me.

are these in stock ready to ggo ?

some have cleared and been sent

Do you need a VI to test these on??

I'm sure you'll sell heaps more of these once everyone see's one of those blinging on my car

I'm buying one!

Tomei manifold, Tomei cams, and Tomei turbo is the plan. 250 atw and 47's at Eastern Creek is the hope.

Even Pete can't resist...

250KW?? Is that all??

LoLz at Damo's new "EvoOz Vice Squad"!!

what do these compare like to evo green or red looking to buy new turbo soon

Considering no one has installed one yet, your not going to get much of a response...

Maybe in the next week or so...

i just though a comparison on paper thats all will b good to see

There is already a Tomei ARMS discussion thead with a fair bit of that info + links to the Tomei website that has the rest of the info.

has anyone fitted one of these sexy babies yet

i dont think anyone has yet, but im sure there will be soon.

Hoping for the 'From Just JDM' box to arrive today or tomorrow - car is booked in for Wednesday next week...hopfully it is less than 40+degrees next week during the fitting and tuning...!

Nice work Todd, modding bug bit again? Let us know how it goes.

Best of luck Todd

should be on your door any day now.

ok guys flood gates are open.




so who wants TURBOS!!!!!!

might be fair keen....just waiting on some results lol

snooze you loose people.....

I want a setup that works!!

After spending 6K on the 1st set up, and being way 2 wild.
then 9K on the 2nd... that didnt see light

I thing a simple 3K for a Direct bolt on sounds verrryyyyyy tempting!!!!

you know the plan.

ok everyone who has paid turbos have been sent...



so who wants turbos!!!!!

i think you will find that after these are installed and results are shown you will be selling out of stock ryan

thinking the same, and yes one is put aside for you.

GUys my next shipment (still have stock) of these will be in 10days

and giddy up PLENTY INSTOCK!!!!!

guys, seeing this turbo in the flesh makes me want to buy another and use it as a portable fan. There a damn hot turbo and will have the figures to match the looks.


now where did i put my tissues.....

well robz on here has a evo red and has got 260awkw.. on 98octan.. at 25psi...

^ 25 psi is a LOT of boost. That's about 1.7 bar!

I'd like to achieve 250atw on around 21 or 22 psi ideally.

id be hoping for around that figure to or close to it, hopefully by the end of the week or early next

Was downtoday at the workshop kurt your car is looking the goods,

really, thats good news. darren has organised with scott to have it tuned pretty much as soon as everything is on

^ Is that why they are dragging their feet with my car

As long as I get it back on Friday...

oh is that your carbing front strut brace there

^^ When i picked up my car yesterday Kurt i saw your car there, in fact i was chatting to dave while he was putting together your turbo kit ha ha, having a look at your car. I think he might have only made one or two mistakes while we were chatting, but i'm sure he fixed them after i left

Looks like you've spent some pretty serious coin on your ride mate, hope it all works out for you

hahaha your a character i was thinking of swapping your dms with my standard suspension.hahaha, hopefully it goes well as ive researched what would be a well balanced package