Sign in to follow this  
Cory

[QLD] FS - Evo 6 2.3L FP Black

Recommended Posts

FS - 2.3L FP Black Evo 6 GSR

The time has come to move on and I am putting my evo up for sale. I have put together a mod list below, but I have probably forgotten some items. Some important points are:

- It now has the standard evo 6 interior in it.
- It has no AC, but it could be added back in, everything inside the cab is still inplace, you would need the wiring loom, condensor, compressor lines etc in the engine bay.
- Front and rear lips could use a repaint
- The door trims in some spots have the usual CP issue of coming off.
- Runs on 98 fuel
- Currently runs 27-28psi, but could easily handle more.
- 11.9s qtr mile time
- This car has had over $100k spent. I am the first owner in Australia and have owned it for 11 years.
- No money owing on it
- Car has just under 97k kms on it, new motor went in around 83k km so it is well worn in and all the bugs ironed out.

- Tuned by Benchmark

Located Brisbane Southside

Price - $37,000 Neg with RWC and wheels.

Please PM me for further info or call 0431 902 808. I will take more pictures, I just want to see if there is any interest at this stage.

Few more pics in here - http://www.speedhunters.com/…/blurred-lines-an-evo-street-…/

Build thread - 

 

Motor
Brand new Evo 8 4G63 block stroked to 2.3L
Manley 100mm Crank
Manley Turbo tuff Forged Pistons
Manley turbo tough rods
ACL Rod Bearings
ACL Main Bearings
New Water Pump Installed few thousand kms ago
Balance Shaft Eliminated
OEM Oil Pump Installed
OEM timing belt
ACL Race bearings
New hydraulic tensior on timing belt
Fluidampr harmonic balancer and ARP bolt
Forced performance FP black JB turbocharger
Quickspool custom exhaust manifold
Headwork performed by JHH Racing
ARP headstuds
OEM head gasket
Kelford 272 cam shafts
Tomei cam gears
GSC beehive valve spring set
Evo 9 lifters
2mm oversized exhaust valves
1mm oversized intake valves
Ported and polished
Kiggly racing HLA
Monster sport thermostat
Agency power drivers side engine mount
Ralliart rear engine mount
Torque Solutions gearbox mount
Dryden Motorsports coil pack cover
Dryden camshaft position sensor heatshield
Dryden ABS module cover
Grimmspeed 3 port BSC
Custom intercooler piping
Hyperflow Intercooler
Moroso oil/air seperator
Turbosmart BOV
Speed density tuned by Benchmark
K&N pod filter
Custom airbox
Ebay radiator
Power steering cooler
Greddy oil cooler
Ralliart spark plug leads
Bosch 044 fuel pumps with custom surge tank, Walbro lift pump
Accusump
GTpumps dump pipe
Fujitsubo RM01A exhaust with high flow catalytic convertor
Custom front pipe off the dump by Jimboomba Exhaust
Custom intake
Custom overflow and power steering reservoir
Zakelcorp clear cam gear cover
Evo 7 Ported intake manifold
Evo 9 throttle body and new IACV
AEM fuel rail
Accusump oil accumulator
Omni 4 bar MAP sensor
Innovate MTX-L wideband
K&N pod filter
Dryden tubular manifold heatshield
COP kit
Baffled sump
Tomei crankshaft scraper
Dryden air deflector
GTPumps dump pipe
Custom front pipe ceramic coated
3” exhaust
Meek turbo outlet

Fuel System
Speedflow fittings and line for fuel system
Two Summit Racing fuel filters
Dryden boot spare wheel well cover for fuel system
Moroso fuel cooler
2x Bosch 044 pumps
AI 2L surge tank
AEM Fuel rail
OEM pump for lift pump
Turbosmart FPR
FIC 1050cc injectors
Aeromotive fuel pump speed controller

Driveline
Factory evo 6 torsen LSD, rebuilt transfer last 10k kms
Competition Clutch twin plate clutch with hard line to cylinder
Evo 9 RS rear diff, rebuilt before putting in.
Dryden Motorsport RS rear diff
Ralliart bushes
Torque solutions tailshaft carrier bushes
Standard 5 speed gearbox
New front wheel bearings

Brakes
T2 Front slotted rotors
RDA slotted rear rotors
Elig 2021 compound brake pads rear
Braided brake lines all round

Suspension
Tein Monoflex Coilovers (wiith 9kg front and rear spring rates)
Tein EDFC
Cusco Under body brace
Cusco front sway bar
Cusco rear sway bar
Dryden Motorsports front and rear strut braces
All bushes replaced with Whiteline 2015

Wheels
AME TM-02 18x9.5+22 with Federal tyres
ARP extended front wheel studs
3mm spacers on front
Extended wheel nuts on front, RAYS on rear

Interior
Stock interior
Torque solution shifter base bushes
Autometer boost, oil temp and oil pressure gauges
CP9A three gauge dash pod
FIA kill switch

Body
99GSR number plates
Amber front indicators
Evo 6 rear garnishes
Dryden rear tow hook

Edited by Cory

Share this post


Link to post
Share on other sites
Sign in to follow this