Sign in to follow this  
josh@jsai

BINARY ENGINEERING LOWERING SEAT BRACKETS ON SALE + FREE DELIVERY

Recommended Posts

As some people know i stock the BINARY ENGINEERING Products here in Australia. Mainly the LOWERING SEAT BRACKETS.

The Original - Binary seat lowering brackets for the stock Recaro Seats found in Mitsubishi Lancer Evolutions VII-IX. These work on all global models of the CT9A Chassis, including: USDM, JDM, EDM etc; any EVO 7-9.

These brackets replace the existing factory mounting brackets and allow your seat to be dropped by 1.5 inches retaining the stock sliders. The improvement in driver position IS MASSIVE. The 1.5" drop makes all the difference and creates a true motorsports driving experience. Your eyes will now look directly through the dash and make you focus down the track instead of directly in-front of your bumper. Your arms will have a more natural path to the steering wheel and the shifter allowing you to comfortably perform fast paced motorsports driving techniques. The lower position of the hips will create more clearance for your legs beneath the steering wheel giving you room for heel-toe downshifts, as well as better alignment to the pedals. An obvious benefit is helmet clearance for us tall folks. Overall the car will finally feel like a proper sports car, or even a go-kart, you won't feel like you're driving from a high-chair.

post-36590-1343855601_thumb.png post-36590-1343855628_thumb.png

post-36590-1343855666_thumb.pngpost-36590-1343855694_thumb.png

post-36590-1360582458_thumb.jpg

These are the original EVO seat lowering brackets ? with hundreds sold and tested throughout the world. These are not knock-offs made from cheesy unfinished stainless steel finish.

CAD design.

CNC laser cut.

CNC formed.

Powder Coated.

Install with Simple hand tools in under an hour.

Create a true motorsports driving postition.

Increased helmet clearance

More clearance for heel-toe

Improved pedal alignment

Keeps eyes looking down the track

Allows for better turning and shifting response

NOTES: A few positions fully forward (for really short folks) are not compatible with the brackets. The sliders end up stopping against the chassis mounting hardware. So be aware of that if you run your seat all the way to the front. People 5'6" have them installed and are still able to use them in their preferred seating position, so it shouldn't really effect too many people.

ON SALE FOR:

$169 (for the set - Drives Side & Passenger Side) FREE DELIVERY

$108 (for drivers side only) FREE DELIVERY

These items are in stock and no need to wait weeks for delivery from overseas.

JSAI is located at:

238-258 Captain Cook Drive, Kurnell, NSW.

Monday - Friday 9:30am- 4:30pm

Saturday- by appointment only.

For more info or to order please send us a pm, a text message or email.

M: 0405 153 290

Email: josh@jsai.com.au

Web: www.jsai.com.au

Please note, The fiberglass and carbon fiber manufacturing process is a "hands on" process which often prevents us from taking calls during business hours. For this reason it is best to send us a text, pm or email and we will get back to you ASAP. We make every effort to get back to customers within 24 hours of receiving a message.

Edited by josh@jsai

Share this post


Link to post
Share on other sites

Hi Josh

Keen as for a set. Does the kit include both drivers and passengers -or- just the drivers seat?? And can I pick up from your Tullamarine distributor or do I order from you??

Cheers, Tim

Share this post


Link to post
Share on other sites

Hi Tim, yes you can pick up from Jap Warehouse. When did you want to pick up as i will have to send afew sets down for him next week.

Edited by josh@jsai

Share this post


Link to post
Share on other sites

Just letting people know had a new shipment arrive monday.

Only have 5 drivers & passangers side sets left in stock and one single drives side set left in stock.

post-36590-1344994004_thumb.jpg

$169 for the drives and passangers set.

or $109 for the single drives side.

*Free postage Australia wide.

* Pick up at our shop is welcomed business hours or after hours pick up in sydneys easten suburbs or CBD.

JSAI is located at:

238-258 Captain Cook Drive, Kurnell, NSW.

Monday - Friday 9:30am- 4:30pm

Saturday- by appointment only.

For more info or to order please send us a pm, a text message or email.

M: 0405 153 290

Email: josh@jsai.com.au

Web: www.jsai.com.au

Please note, The fiberglass and carbon fiber manufacturing process is a "hands on" process which often prevents us from taking calls during business hours. For this reason it is best to send us a text, pm or email and we will get back to you ASAP. We make every effort to get back to customers within 24 hours of receiving a message.

Share this post


Link to post
Share on other sites

More seat brackets arrived today.

These can be picked up during business hours at the workshop or after hours in Sydney's Eastern Suburbs or Sydney CBD.

post-36590-1360582757_thumb.jpg

post-36590-1360582727_thumb.jpg

PM, txt or call: 0405153290

I have these in my car so please feel free to come and it in my car and feel the differance.

Share this post


Link to post
Share on other sites

Hi there,

Would you still have these in stock?

If so can i get a price delivered or I can pickup from Melbourne.

Thanks,

Tony

Share this post


Link to post
Share on other sites

NEW STOCK ARRIVED... SO WHY NOT OFFER SPECIAL PRICES :)

ON SALE FOR:

$169 (for the set - Drives Side & Passenger Side) FREE DELIVERY

$108 (for drivers side only) FREE DELIVERY

These items are in stock and no need to wait weeks for delivery from overseas.

*DONT FORGET TO LIKE US ON FACEBOOK :)

  • Like 1

Share this post


Link to post
Share on other sites

CHey mate how you going? M keen on the driver side binary seat brackets? How much is shipping to Melbourne 3023 or can I pick up anywhere in Melbourne? Cheers Milan

Share this post


Link to post
Share on other sites

Jsai ebay store says no processing until early next month, so hopefully we will hear back soon :)

Share this post


Link to post
Share on other sites

Got these installed in my evo, highly recommended mod

Share this post


Link to post
Share on other sites

It's not easy being tall in an Evo is it Mick? I'm 6ft2 and I have maybe 1cm to the roof. If I could lower the seats more than an inch I'd be stoked

Share this post


Link to post
Share on other sites

1st world problems mate haha! But definitely would like a sportier seating position :)

Share this post


Link to post
Share on other sites

I bought a set of seat brackets from Josh a few weeks ago, so he does still stock them. Also they are definitely worth the money :) The difference is night and day.

Share this post


Link to post
Share on other sites
Sign in to follow this