tbomb

Senior Member
  • Content Count

    2,981
  • Joined

  • Last visited

  • Days Won

    69

tbomb last won the day on August 26 2016

tbomb had the most liked content!

Community Reputation

998 Excellent

About tbomb

  • Rank
    cucumber sandwich, no crust please
  • Birthday 01/01/2011

Contact Methods

  • Website URL
    http://

Profile Information

  • First Name
    Tim
  • Car
    8MR
  • Location
    Melbourne VIC
  • Gender
    Male

Recent Profile Visitors

1,679 profile views
  1. Find me someone that hasn't been blown away by his service Damn shame Ivan won't be making these again, have seen the quality and fitment in person - phenomenal
  2. Road Track Rally built a 2.2L 712, checkout their Facebook page
  3. What experience are you after Roger? There's a bit of feedback in the thread already Non Mivec 2.0L will see 24-26psi @ ~4K (Mivec will claw back 200-300rpm). Most cars seem to make 300aw+ E85 Benny has a lot of cars running this package (712 & E85), lots of results on his Facebook page: https://m.facebook.com/profile.php?id=351882751574778
  4. Good read. Thanks for posting What are the costs involved here (assuming everything checks out OK so it's a re-shuffle and reassemble)?
  5. ^ anybody that thinks so has not back to back tested a stock panel filter against a decent pod
  6. ^ Actuator is dependent on what boost you intend on running If you're aiming for 25psi the 20 or 22psi is a good option (let your boost controller handle the extra ~5psi). As always consult your tuner first
  7. Flow rates for anyone interested. Hopefully Mark can add 762 & 822 to the list? Stock 9.............. 44 lb./min. BBK Lite .............. 47 lb./min. FP Green (Gen 1)... 47 lb./min. Tomei ARMS ......... 48 lb./min. BBK Full................ 51 lb./min. HKS 7460 ................ 51 lb./min. GT Pumps 712 ............54 lb./min. FP 73HTA Green.... 54 lb./min. FP HTA 3076......... 57 lb./min. BB-X....................... 57 lb./min BBK-B.................. 57 lb./min. FP Red ................. 60 lb./min. GT35R .................. 65 lb./min. FP 82HTA Black...... 68 lb./min. GT37R.................... 75 lb./min FP 3582 HTA............. 75 lb./min FP 3586 HTA............. >75 lb./min
  8. What pump Mick? I'm also outta fuel, 416 Walbro on stock wiring. Very lean >6K, IDC @ 110 :s
  9. Yep 3rd gear. Thanks Mark Still waiting for graphs. Have only cleaned up AFR's so far, no timing or changes to setting in EVC so we may be able to salvage some response. Mid and top end is strong, just feels a tad doughy down low... May have to get others to drive for some opinions
  10. Hi Mark Can you confirm when the 712 should be seeing 26psi (you recommend 26-32psi) on a non-Mivec motor? I'm seeing 20psi by 3800, 24psi a touch before 4K. Seem about right? For comparison sake on the exact same set up I was making 24psi by 3200 with a 9RS turbo. I can post both graphs later if you need. Figured I would post up here (rather than PM) so guys know what to expect
  11. Yes. You just need Evo 9 fitting kit as the coolant lines and compressor outlet pipe differ Thats a ~350aw turbo tho, block prob wont last too long
  12. LOL, we should really change his member name to stop confusing people :P Would you be ok with VRSEvo?
  13. What sort of power is expected from the 712 with usual bolt ons Mark? What boost do you suggest for street & track?